Wittenstein
v
start
configuration wizard
contact us
privacy policy
short list
 
 
configuration: general application (rotational)
configuration: general application (rotational)
rpm
rpm
lbfin
lbfin
"Continuous operation: Duty cycle is greater than 60% or longer than 20 minutes
    → enter nominal speed and nominal torque.
Cyclic operation: Duty cycle is less than 60% and shorter than 20 minutes
    → enter maximum speed and maximum torque

Gear selection takes into account a torque utilization range from 33% to 100% and a speed utilization range from 20% to 100%.
Utilzation range can be adapted in the details of the gear configuration."
lbf
lbf
Select which forces, if any, affect your application.
Only gearboxes that fulfil at least the values entered will be selected.
arcmin
arcmin
thou
thou
thou
Please specify the required backlash. Torsional and linear backlash are calculated based on the value of the radius.
Only gearboxes that show a backlash within the entered range will be selected. (backlash greater than minimum value and smaller than maximum value)
rpm
rpm
The values entered for motor speed are used as selection criteria for the motor database.
For continuous operations, the motor database is queried by nominal speed; for cyclic operations, the motor database is queried by maximum motor speed.
The entered range also defines the ratio for the gearbox.
next
Searching for solutions …